Kishimoto Shinya (岸本 真弥) is a paper manufacturer who has competed in seven SASUKE tournaments. At the start line, he shows off his great strength by bending a frying pan.
He then participated in SASUKE 30, where he put on his best performance so far, clearing the first two stages with ease and becoming only the third person (after Morimoto Yūsuke and Kawaguchi Tomohiro) to clear the Crazy Cliffhanger. Unfortunately, he became the first person to fail the Vertical Limit, losing his grip about halfway through.
Kishimoto has built several replicas of obstacles, including the Salmon Ladder, Shin-Cliffhanger, and his most recent replica, the Ultimate Cliffhanger, which he has shown he can complete, as seen on his YouTube page.
In SASUKE 31, he received #90 based on his previous performance, however, due to a back injury, he was not able to compete.
He then participated in SASUKE 32, wearing #88, and was shown preparing for his run after Nagasaki Shunsuke (who wore #87) cleared the First Stage. However, the broadcast skipped to Urushihara Yuuji, who wore #89, meaning his run was all cut. It is known that he timed out on the Soritatsu Kabe.
In SASUKE 33, wearing #80, his run was all cut as he was shown on Trailer. Showing that he shockingly failed the first obstacle Quad Steps. He had hit the first step high, and he didn't get enough push to the second step and he only got half of his foot on the step, causing it to slip.
|25||95||Failed Dome Steps (First Stage)|
|26||8||Failed Rolling Escargot (First Stage)|
|27||17||Failed Soritatsu Kabe (First Stage)||Time Out. Shown on SASUKE 27 Navi.|
|29||88||Failed Hedgehog (First Stage)||All Cut. External Information.|
|30||2973||Failed Vertical Limit (Third Stage)||First to fail Vertical Limit.|
|31||90||Withdrew||Injured, Did not compete.|
|32||88||Failed Soritatsu Kabe (First Stage)||All Cut.|
|33||80||Failed Quad Steps (First Stage)||All Cut. Shown on Trailer.|